Happy Halloween from ARM TechCon
MENTOR GRAPHICS AT ARM TECHCON
This week ARM® TechCon® 2013 is being held at the Santa Clara Convention Center from Tuesday October 29 through Thursday October 31st, but don’t worry, there’s nothing to be scared about. The theme is “Where Intelligence Counts”, and in fact as a platinum sponsor of the event, Mentor Graphics is excited to present no less than ten technical and training sessions about using intelligent technology to design and verify ARM-based designs.
My personal favorite is scheduled for Halloween Day at 1:30pm, where I’ll tell you about a trick that Altera used to shave several months off their schedule, while verifying the functionality and performance of an ARM AXI™ fabric interconnect subsystem. And the real treat is that they achieved first silicon success as well. In keeping with the event’s theme, they used something called “intelligent” testbench automation.
And whether you’re designing multi-core designs with AXI fabrics, wireless designs with AMBA® 4 ACE™ extensions, or even enterprise computing systems with ARM’s latest AMBA® 5 CHI™ architecture, these sessions show you how to take advantage of the very latest simulation and formal technology to verify SoC connectivity, ensure correct interconnect functional operation, and even analyze on-chip network performance.
On Tuesday at 10:30am, Gordon Allan described how an intelligent performance analysis solution can leverage the power of an SQL database to analyze and verify interconnect performance in ways that traditional verification techniques cannot. He showed a wide range of dynamic visual representations produced by SoC regressions that can be quickly and easily manipulated by engineers to verify performance to avoid expensive overdesign.
Right after Gordon’s session, Ping Yeung discussed using intelligent formal verification to automate SoC connectivity, overcoming observability and controllability challenges faced by simulation-only solutions. Formal verification can examine all possible scenarios exhaustively, verifying on-chip bus connectivity, pin multiplexing of constrained interfaces, connectivity of clock and reset signals, as well as power control and scan test signal connectivity.
On Wednesday, Mark Peryer shows how to verify AMBA interconnect performance using intelligent database analysis and intelligent testbench automation for traffic scenario generation. These techniques enable automatic testbench instrumentation for configurable ARM-based interconnect subsystems, as well as highly-efficient dense, medium, sparse, and varied bus traffic generation that covers even the most difficult to achieve corner-case conditions.
And finally also on Halloween, Andy Meyer offers an intelligent workshop for those that are designing high performance systems with hierarchical and distributed caches, using either ARM’s AMBA 5 CHI architecture or ARM’s AMBA 4 ACE architecture. He’ll cover topics including how caching works, how to improve caching performance, and how to verify cache coherency.
For more information about these sessions, be sure to visit the ARM TechCon program website. Or if you miss any of them, and would like to learn about how this intelligent technology can help you verify your ARM designs, don’t be afraid to email me at firstname.lastname@example.org. Happy Halloween!
Posted October 30th, 2013, by Mark Olen
- Loading tweets...
- Loading tweets...
- Loading tweets...
- DVCon 2014 Issue of Verification Horizons Now Available
- DVCon–The FREE Side
- More DVCon–More Mentor Tutorials!
- UVM 1.2: Open Public Review
- DVCon 2014: Standards on Display
- Just because FPGAs are programmable doesn’t mean verification is dead
- Managing Verification Coverage Information
- Epilogue: The 2012 Wilson Research Group Functional Verification Study
- New Verification Horizons Issue Available
- Happy Halloween from ARM TechCon
- March 2014 (1)
- February 2014 (5)
- January 2014 (1)
- November 2013 (2)
- October 2013 (3)
- September 2013 (2)
- August 2013 (4)
- July 2013 (6)
- Part 7: The 2012 Wilson Research Group Functional Verification Study
- Walking in the Desert or Drinking from a Fire Hose?
- Part 6: The 2012 Wilson Research Group Functional Verification Study
- A Short Class on SystemVerilog Classes
- Part 5: The 2012 Wilson Research Group Functional Verification Study
- Part 4: The 2012 Wilson Research Group Functional Verification Study
- June 2013 (2)
- May 2013 (4)
- April 2013 (2)
- March 2013 (2)
- February 2013 (5)
- January 2013 (1)
- December 2012 (1)
- November 2012 (1)
- October 2012 (4)
- September 2012 (1)
- August 2012 (1)
- July 2012 (6)
- June 2012 (1)
- May 2012 (3)
- March 2012 (1)
- February 2012 (6)
- January 2012 (2)
- December 2011 (2)
- November 2011 (2)
- October 2011 (3)
- September 2011 (1)
- July 2011 (3)
- June 2011 (6)
- Intelligent Testbench Automation Delivers 10X to 100X Faster Functional Verification
- Part 9: The 2010 Wilson Research Group Functional Verification Study
- Verification Horizons DAC Issue Now Available Online
- Accellera & OSCI Unite
- The IEEE’s Most Popular EDA Standards
- UVM Register Kit Available for OVM 2.1.2
- May 2011 (2)
- April 2011 (7)
- User-2-User’s Functional Verification Track
- Part 7: The 2010 Wilson Research Group Functional Verification Study
- Part 6: The 2010 Wilson Research Group Functional Verification Study
- SystemC Day 2011 Videos Available Now
- Part 5: The 2010 Wilson Research Group Functional Verification Study
- Part 4: The 2010 Wilson Research Group Functional Verification Study
- Part 3: The 2010 Wilson Research Group Functional Verification Study
- March 2011 (5)
- February 2011 (4)
- January 2011 (1)
- December 2010 (2)
- October 2010 (3)
- September 2010 (4)
- August 2010 (1)
- July 2010 (3)
- June 2010 (9)
- The reports of OVM’s death are greatly exaggerated (with apologies to Mark Twain)
- New Verification Academy Advanced OVM (&UVM) Module
- OVM/UVM @DAC: The Dog That Didn’t Bark
- DAC: Day 1; An Ode to an Old Friend
- UVM: Joint Statement Issued by Mentor, Cadence & Synopsys
- Static Verification
- OVM/UVM at DAC 2010
- DAC Panel: Bridging Pre-Silicon Verification and Post-Silicon Validation
- Accellera’s DAC Breakfast & Panel Discussion
- May 2010 (9)
- Easier UVM Testbench Construction – UVM Sequence Layering
- North American SystemC User Group (NASCUG) Meeting at DAC
- An Extension to UVM: The UVM Container
- UVM Register Package 2.0 Available for Download
- Accellera’s OVM: Omnimodus Verification Methodology
- High-Level Design Validation and Test (HLDVT) 2010
- New OVM Sequence Layering Package – For Easier Tests
- OVM 2.0 Register Package Released
- OVM Extensions for Testbench Reuse
- April 2010 (6)
- SystemC Day Videos from DVCon Available Now
- On Committees and Motivations
- The Final Signatures (the meeting during the meeting)
- UVM Adoption: Go Native-UVM or use OVM Compatibility Kit?
- UVM-EA (Early Adopter) Starter Kit Available for Download
- Accellera Adopts OVM 2.1.1 for its Universal Verification Methodology (UVM)
- March 2010 (4)
- February 2010 (5)
- January 2010 (5)
- December 2009 (15)
- A Cliffhanger ABV Seminar, Jan 19, Santa Clara, CA
- Truth in Labeling: VMM2.0
- IEEE Std. 1800™-2009 (SystemVerilog) Ready for Purchase & Download
- December Verification Horizons Issue Out
- Evolution is a tinkerer
- It Is Better to Give than It Is to Receive
- Zombie Alert! (Can the CEDA DTC “User Voice” Be Heard When They Won’t Let You Listen)
- DVCon is Just Around the Corner
- The “Standards Corner” Becomes a Blog
- I Am Honored to Honor
- IEEE Standards Association Awards Ceremony
- ABV and being from Missouri…
- Time hogs, blogs, and evolving underdogs…
- Full House – and this is no gamble!
- Welcome to the Verification Horizons Blog!
- September 2009 (2)
- July 2009 (1)
- May 2009 (1)