Converging on SAE Convergence

SAE Convergence® 2010 is coming up fast on my calendar – October 19-20 at Cobo Center in Detroit, Michigan. Though I’ve been to more industry trade shows than I care to count, this will be my first time at the SAE Convergence conference, which is focused on advances in automotive electronics.

There is no doubt that electronics is playing an increasingly important role in automotive system design. Automotive interiors are adorned with visible electronic accessories like stereos, trip computers, and climate controls that we interact with and often take for granted. But perhaps the more important category of automotive electronics are the systems that work behind the scenes to improve vehicle efficiency, reduce emissions, and increase safety – the systems we depend on to keep our cars running at peak performance while transporting us safely to our destinations, whether across the street, across town, or across the nation. Automobiles are a prime example of mechatronic systems, where the performance of once purely mechanical systems is improved with electronic control aided by sensors and actuators – a perfect application for mechatronic system modeling, simulation, and analysis. And that’s why, along with many electronic systems manufacturers and suppliers, you will also find several electronic design automation (EDA) vendors, including Mentor Graphics, exhibiting at the conference.

This year, Mentor Graphics will be in booth 1010 talking about our suite of tools that support a variety of automotive design challenges, including:

  • E/E architecture, systems, and network design
  • System modeling and analysis
  • Electrical systems design & wire harness engineering
  • Thermal design, testing, and simulation
  • Embedded software
  • PCB systems design

I’ll be there talking about our SystemVision® mechatronic system design environment, and highlighting our link with the National Instruments™ LabVIEW™ virtual test development tools.

As an SAE Convergence newbie, and a long time automotive enthusiast, I’m looking forward to the conference. No doubt there will be many interesting things to see. If you happen to be at the conference, drop by booth 1010 and say hello.

Post Author

Posted October 8th, 2010, by

Post Tags

, , ,

Post Comments

No Comments

About Mike Jensen's Blog

Views, insights, and commentary on mechatronic system design and analysis. Mike Jensen's Blog

Comments

Add Your Comment

Archives

October 2014
  • Reliability vs Robustness
  • June 2014
  • Wow Factor
  • May 2014
  • SystemVision 5.10.3
  • March 2014
  • IESF 2014: Military & Aerospace
  • Engineering Oops!
  • Big Engineering
  • January 2014
  • SystemVision Model Wizard
  • December 2013
  • SystemVision 5.10.2
  • Modeling: An Engineer’s Dilemma
  • October 2013
  • What is Your Legacy?
  • September 2013
  • Automotive IESF 2013
  • July 2013
  • Simple Design Solutions
  • June 2013
  • SystemVision 5.10
  • May 2013
  • Engineering Muscle Memory
  • EDA vs. Windows 8
  • March 2013
  • VHDL-AMS Stress Modeling – Part 3
  • January 2013
  • VHDL-AMS Stress Modeling – Part 2
  • VHDL-AMS Stress Modeling – Part 1
  • December 2012
  • Practice! Practice!
  • November 2012
  • Sharing Tool Expertise
  • October 2012
  • Preserving Expertise
  • Virtual Prototyping — Really?
  • Innovations in Motion Control Design
  • September 2012
  • Game Changers
  • Do We Overdesign?
  • August 2012
  • Tsunami Remnants
  • July 2012
  • A New Look at Device Modeling
  • SystemVision 5.9
  • June 2012
  • Veyron Physics
  • May 2012
  • Rooster Tail Engineering
  • April 2012
  • Automotive IESF 2012
  • Teaching and Learning CAN Bus
  • March 2012
  • Analog Modeling – Part 6
  • Analog Modeling – Part 5
  • Analog Modeling – Part 4
  • February 2012
  • Analog Modeling – Part 3
  • Analog Modeling – Part 2
  • January 2012
  • Analog Modeling – Part 1
  • Connecting Tools and Processes
  • December 2011
  • Turning-Off and Tuning-In
  • Use vs. Experience
  • Analyzing the Big Picture
  • November 2011
  • Simulating for Reliability
  • October 2011
  • SystemVision 5.8
  • VHDL-AMS Model Portability — Fact or Fiction?
  • September 2011
  • IESF 2011 Moves to Frankfurt
  • Simulation Troubleshooting
  • August 2011
  • Qualities of VHDL-AMS Quantities
  • Military & Aerospace IESF 2011
  • Touring Johnson Space Center
  • July 2011
  • Engineering versus Science
  • June 2011
  • System Reengineering
  • May 2011
  • Integrating Hardware and Software Design
  • Engine Remote Start
  • Integrated System Design
  • Simulation Experiments (Part 3)
  • April 2011
  • Automotive IESF 2011
  • Pushbutton Cars
  • System Simulation with FEA-Base Motor Models
  • March 2011
  • Simulation Experiments (Part 2)
  • Simulation Experiments (Part 1)
  • Japan: Patience and Grace Amid Disaster
  • Top Gear = Driving Fun
  • February 2011
  • Buoyancy
  • Ideas in Motion
  • January 2011
  • The Mechanical Half of Mechatronics
  • Detroit Auto Show
  • Signal-flow vs Conserved System Modeling
  • SystemVision 5.7…Ready, Set, Go!
  • December 2010
  • SystemVision and Windows 7
  • Friction Vacation
  • Simulation Beyond Volts and Amps (Part 4)
  • November 2010
  • Simulation Beyond Volts and Amps (Part 3)
  • Simulation Beyond Volts and Amps (Part 2)
  • Simulation Beyond Volts and Amps (Part 1)
  • October 2010
  • SAE Convergence Recap (and an Unexpected Surprise)
  • VHDL-AMS Black Belt
  • Converging on SAE Convergence
  • System Design vs System Repair
  • September 2010
  • What’s the “AMS” in VHDL-AMS?
  • How Sensitive is Your System?
  • Do You Trust Your Simulator?
  • August 2010
  • What’s in a SPICE Model?
  • Cycling + Gravity = Pain
  • NI Week: Fun for Engineers
  • June 2010
  • Are You a Flexible Thinker?
  • VHDL-AMS and Switch Hysteresis
  • May 2010
  • VHDL-AMS Revisited
  • Segway to U3-X
  • Atomic Glue
  • March 2010
  • IESF Recap
  • February 2010
  • IESF is Coming…
  • System Level HDL-topia
  • January 2010
  • Mastering Design Abstraction
  • The Joy of Disassembly